What happens when foreign matters enter the hydraulic cylinder? When cleaning the hydraulic cylinder, it must be noted that when the pipeline is cleaned again after the installation, it should not pass through the cylinder again. Instead, the pipeline should be installed in front of the oil port of the cylinder. Otherwise, the foreign matters in the pipeline will directly enter the cylinder. After entering, it is difficult to remove them, so that the foreign matters are transported inside the cylinder.

In addition, the foreign matters in the pipeline need to be removed during cleaning.

In addition, for the chips generated during the processing of pipes, when the burrs on both ends of pipes are removed after the pipe is cut to size and processed, the burrs should not be left behind, or when the welded pipes are operated, the steel pipes should not be placed around, because it is easy to cause the foreign matters to be mixed in. Therefore, if the pipes need to be placed around, The pipe orifice should be directly sealed, and the pipes should be stacked on a dust-free work surface.

When we install and inspect it, we will use different winding methods such as linear and sealing tape. Therefore, the sealing tape will be cut off for use, and then it will directly enter the cylinder. Moreover, the linear seal will have an impact on the winding. In serious cases, it will lead to the inflexible action of the one-way valve of the hydraulic cylinder.